Микросхема SN74HC245PWR, АП6

Характеристики

SN74HC245PWR, АП6The SN74HC245PWR is an octal Bus Transceiver with 3-state outputs and designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.

• High-current 3-state outputs drive bus lines directly or up to 15 LSTTL loads
• 80µA maximum ICC low power consumption
• 12ns typical Propagation delay (tpd)
• ±6mA Output drive at 5V
• 1µA maximum Low input current
• Green product and no Sb/Br

Микросхемы / Логические микросхемы / Микросхемы ТТЛ (серия 74)
Корпус: 20-TSSOP, инфо: Логический элемент ТТЛ Шинный формирователь неинвертирующий двунаправленный 8-бит КМОП кристалл, примечание: АП6